325
E. 10th St. Halstead KS. 67056325
E. 10th St. Halstead KS. 67056
800-835-1003 Fax 316-835-3218
Clipper® Lacing & Acc.
CLIPPER®
Lacing Selection, Specialty Carded
Hooks, Vise Lacers,
Lever Action Lacer, Chain Lacer, Roller
Lacer, Pins,
Pin Material Bulk, Pin Material PINPAK, Specialty
Pins, Belt Cutters, Smart
Locks
What
Makes Rectangular HT Hooks So Much Stronger?
The Rectangular wire
provides 32% more mass than regular round wire, giving that extra margin
of strength needed in high abrasion situations. As an added plus, it has a
high resistance to fracture and fatigue.
|
Recommended |
Hook |
Belt |
Minimum |
Card |
No. Cards |
Galvanized |
High Tensile Hooks (Without Pins*) |
430 Stainless Hooks (Without Pins*) |
|
Pickup Belt |
#2 Short Pt |
1/8 - 5/32 5/32 - 3/16 |
3” |
12”cds |
12/ctn |
CL 2SP |
- - |
- CL 2 SS |
| 2 ply Smth, MRT |
#3 #3-4 1/2-6 #4 |
3/16 - 7/32 7/32 - 1/4 7/32 - 1/4 |
31/2” 31/2” 4" |
12”cds 12”cds 12”cds |
12/ctn 12/ctn 12/ctn |
CL 3 CL 3456 CL 4 |
CL 3 HT CL 3456 HT CL45-3RHT |
CL 3 SS - CL 4 SS |
| 3ply Smth,MRT RT, CHEV,DT |
#41/2 41/2 Rect HT #5 #6 #7 |
1/4 - 9/32 1/4 - 9/32 9/32 - 5/16 5/16- 3/8 3/8 - 13/32 |
4” 4" 4" 5" 6" |
12”cds 12”cds 12”cds 12”cds 12”cds |
12/ctn 12/ctn 12/ctn 12/ctn 12/ctn |
CL 45 - CL 5 CL 6 CL 7 |
CL 45 HT CL45R HT CL 5 HT CL 6 HT CL 7 HT |
- - - - - |
| NOTE:
Unibar
is not recommended for Baler Belt use. |
||||||||
|
Unibar |
#U1 |
1/8 - 5/32 |
3” |
12”cds 12”cds 12”cds 12”cds 12”cds |
12/ctn 12/ctn 12/ctn 12/ctn 12/ctn |
CL U1 |
- - - - |
- |
**NOTE:
Any special card lengths or hook size other than those listed above are
“special order” and a $25.00 set-up charge will be billed.
Specially
Carded Hooks For ROUND BALERS
|
Hook |
Cards
for the following |
No. Cards Per Carton |
LEGG CO. Part No |
#3HT |
4" |
72/ctn |
CL 3 HT-4 |
Vise
Belt Lacer
Jaws
| Belt Lacers | For Hook Sizes |
Shipping
Wt. |
LEGG CO. Part No. |
| 4”
Vise Lacer 7” Vise Lacer 10” Vise Lacer No. 1-6” Vise Lacer |
#2-6 #2-6 #2-6 #1 Series |
3 4 5 3 |
R-4 R-7 R-10 1-6 |
Manual,
Lever Action Baler Belt Lacer
Comes with a 7" or 10" vise.
| LEGG CO. Part Number | ||
| CL-18500-10 CL-18500-07 |
10” vise included 7” vise included |
Weight:
62 lbs. 42” x 10” Weight: 62 lbs. 42” x 10” |
| CL 04080-10 | 10” replacement vise | Apprx. 10 lbs. |
Clipperâ Roller Lacers
 |
Designed to lace wide belts in one easy continuous operation. |
|
Excellent for lacing combine pickup belts or large round baler lowers. |
| Width | Legg Co. Part No. | Est. Shipping Wt. (lbs.) |
|
24”
Roller Lacer |
CL-RL24 |
38.0 |
MICRO ROLLER LACER (MICROLACER)
|
The new 14” MICROLACERÔ takes the work out of baler belt repair. |
|
Splices are completed in minutes with one simple, rolling operation. |
|
Easy to use, portable and affordable. |
|
Covers all your belt lacing needs….in the field or in the shop. |
|
Legg Co. Part No. |
Est. Shipping Wt. (lbs.) |
| CL-ML14 | 17.0 |
Clipper Connecting Pins
| Hook Size | #2 | #3 | #4 | #4 1/2 | #5 | #6 | #7 |
|
Clipperâ
Pin Size |
#13 | #13 | #12 | #12 | #11 | #9 | #9 |
Connecting Pins In Coils
|
We recommend ordering connecting pin material in coils so pins can be cut to proper length for belt widths. |
| Size | Pin Diameter |
Legg Co. Part No. | |||
| Nylosteel | Nylon-Covered Cable | Duralink | |||
| #13 #12 #11 #9 |
.093" .109" .125" .156" |
LP
213 LP 212 LP 211 LP 209 |
LP
213 NC - LP 211 NC LP 209 NC |
LP
213 DL LP 212 DL LP 211 DL - |
|
|
CONNECTING PIN MATERIALS |
Spring steel core with a long wearing nylon cover. Unique features include: rigidity for easy insertion into joint, ends can be bent to hold pin in position, and high heat resistant properties. Acceptable for most applications. | Braided wire core with a nylon (or dacron) cover. Features transverse pliability for troughing and crowned pulleys. For easy insertion into wide joints, covered cable can be ordered with leader pin assemblies. | Newly designed cable for heavy belt uses. Teflon/Nylon coating over a braided wire core provides pliability and strength. Highly recommended for 4 1/2" Rect. High Tensile. | ||
Pin PakÔ
100
|
Pin PakÔ 100 is an all-in-one connecting pin dispensing system designed to eliminate tangling and handling problems. Contains 100 ft of connecting pin material, wrapped around a spool inside a corrugated box. Easy to use, store and ship. Just order 100’ of your desired pin part number and ask for the Pin PakÔ 100. | ||||
| Specialty Pin For: |
Legg
Co. |
| Nylon covered rigid steel pin for John Deere®. (Pin Diameter of .080") | LP 211 JD |
| Nylon covered steel cable for replacement of |
ALNC87CABL |
NARROW
CUTTERS
| Belt Cutters | Weight (lbs.) | Legg Co. Part No. |
| 10" Belt Cutter 10" Blade 10" Block |
15 1 |
CL 10 BC CL 10B CL 10BL |
| 14" Belt Cutter 14" Blade 14" Block |
15 1 |
CL 14 BC CL 14B CL 14BL |
WIDE
CUTTERS
|
A portable precision belt cutter. |
|
Includes a safe, self contained blade. |
|
Ratchet Mechanism ensures an easy, accurate, square cut in a single pass. |
|
An excellent accessory to the roller Lacerâ. |
|
Spring-loaded clamp holds belt s secure for a square cut. |
|
One-person operation. |
|
Hinged top frame permits cutting of belts in either the middle or on the end. |
| Belt Cutter | Legg Co. Part No. | Weight (lbs.) |
| 36" Belt Cutter 48" Belt Cutter 60" Belt Cutter Replacement Blade |
CL 36 BC CL 48 BC CL 60 BC CL RB |
25 29 34 1 |
|
A three-in-one solution to common baler belt problems. |
|
Locks and protects splices against belt edge wear. |
|
Adds |
|
Adds up to 50% more splice life. |
|
ORDER Legg Co. Part No. CL-SL |
SMART LOCK KIT
|
Contains 20 smart locks and 5 ft. of cable pin |
|
ORDER Legg Co. Part No. CL-SL/KIT |