325 E. 10th St. Halstead KS. 67056

800-835-1003    Fax 316-835-3218

Lacing & Acc.

Back To Ag Parts Catalog

LACING, TOOLS, AND ACCESSORIES

ALLIGATORฎ
Rivet Lacing, Rivet Application Tools, Tool Kits, Replacement Hinge Pins, Rivets, Retainer Washers, 
Staple Lacing, Staple Application Tools, Staple Kits, Staples, Staple Dispenser,
Hand Skiver,

CLIPPERฎ
Lacing Selection, Specialty Carded Hooks, Vise Lacers, Lever Action Lacer, Chain Lacer, Roller Lacer, Pins,
Pin Material Bulk, Pin Material PINPAK, Specialty Pins, Belt Cutters, Smart Locks

MINETฎ
Fasteners, Minet Accessories 

LEGGฎ
Pick Up Belt Acc., Replacement Oak Slats, Rivets, Port-A-Lacer, Drive Roller Traction Tape, Lacing Cable Pins

 

Belt Grinder/Skiver
Buffing Wheel.jpg (123761 bytes)

bullet

Works in Electric or Pneumatic Drill

bullet

Reduces Time to remove top belt cover to desired gauge.

bullet

Leaves smooth even surface for superior hook/fastener retention

ORDER    Legg Part No.     AL-RB1

 

 

ALLIGATORฎ
Rivet Lacing

Dia Top with Flexco Rivet.jpg (206259 bytes)The new Alligatorโ Rivet Fastening System from Flexco simplifies routine baler belt maintenance. The Alligatorโ Rivet features a sturdy design that delivers a long-lasting, dependable splice that won’t pull out. Fasteners, rivets, and connecting pins are constructed from durable, abrasion-resistant stainless steel for long life.  

bullet

Fasteners are available in precut lengths from 4” to 14”. 

bullet

Self-setting rivets accommodate belts from 1/8” to 7/32” thick, including new or used 2-ply and 3-ply belts.  

LEGG CO PART No.  

BELT WIDTH

CL-AR-4
CL-AR-6
CL-AR-7
CL-AR-10
CL-AR-14

4”
6"
7”
10”
14”

**NOTE: Each package includes fasteners, rivets, and hinge pins for 2 complete splices.

 

 

Rivet Installation Tools

Rivet Lacer Manual.jpg (209302 bytes)Rivet Installation Tool (Standard)

bullet

Easy on-site installation

bullet

The Alligatorโ Rivet splice is easier to install - and less costly - than other plate-style baler fasteners.

bullet

Using the specially made installation tool and a one-pound hammer, fasteners can be installed on-site without removing belts from the baler.

LEGG CO. PART No. TOOL WIDTH

CL-ART-7
CL-ART-14

7”
14”

Rivet Lacer.jpg (178132 bytes)Rivet Installation Tool (Deluxe)

bulletFeatures a forged pneumatic punch for use in your impact gun.
bulletA durable impact resistant guide block.
bulletIncludes hand punch
LEGG CO. PART No. TOOL WIDTH

CL-MART-7
CL-MART-14

7”
14”

 

Pneumatic, Punch Only

Phnumatic Punch.jpg (232369 bytes) ORDER:   Legg Part No.    CL-ARIP

 

 

Complete Tool Kits
Rivet Tool Kit.jpg (168204 bytes)

bulletEach kit includes an installation tool, rough-top belt skiver, one-pond hammer, pin bender and two Alligatorโ Rivet packages. Packaged in a durable tool box.
LEGG CO. PART NUMBER
ARTK-7   7” Installation Tool Kit  
ARTK-14 14” Installation Tool Kit 

 

 

Replacement Hinge Pins
Alg Rivet Pin.jpg (201295 bytes)

bullet

Constructed from 300 Series Stainless Spring Wire

300 Series Stainless Spring Wire Pin
LEGG CO. PART No. BELT WIDTH QTY
ARSS1-4
ARSS1-7
ARSS1-10
ARSS1-14 		4"
7"
10"
14"		 9
8
4
4
Steel Corrugated Hinge Pin
ARS4-7
ARS4-10		 7"
10"		 8
4

 

 

Extra Rivets
Rivets & Pins.jpg (237812 bytes)

PART NUMBER DESCRIPTION
AR3-15 15/pkg.

 

 

Staple Lacing
 Staple Lacing.jpg (207010 bytes)

bullet

FAST, EASY, ON-SITE INSTALLATION

bullet

STRONG, STRAIGHT, BELT LACING

bullet

PORTABLE LIGHTWEIGHT APPLICATOR TOOL

bullet

stainless STEEL staples resist pull out.

bullet

FOR BELTS 1/16” TO 5/16” THICK

bullet

OPERATES ON PULLEYS AS SMALL AS 2”  

bullet

Fastener strips shipped ready to install with hinge pins and staples.  

bullet

Fastener plates are available in specially tested corrosion- resistant steel or Type 316 stainless (special order only).  

SELECTION GUIDE  

Fastener Number

Belt Thickness Minimum Pulley Joints Per Carton Approx. Ship
 Wt. (lbs)  

62
125
187

1/16” - 1/8”
1/8” - 3/16”
3/16” - 1/4"

2”
3”
4”

4
4
4  

3.5
4.5
6.5

bulletBelt width is indicated by the number immediately following the “J” in the order number.
bulletExample: 125J36 is a 125 joint 36” long.
bulletFour complete joints per carton, this will lace four complete belts.
bulletIncludes lace, pins, staples, retaining washers, and instructions.
ALLIGATOR 62 STAPLE ALLIGATOR 125 STAPLE ALLIGATOR 187 STAPLE
W/ STEEL SPRING WIRE PINS W/ NYLON-COVERED STEEL PIN W/ NYLON-COVERED STEEL PIN
LEGG CO. Part Number LEGG CO. Part Number LEGG CO. Part Number
AL 62J24
AL 62J36
AL 62J60
 AL 125J12
AL 125J24
AL 125J36
AL 125J60 		AL 187J24
AL 187J36
AL 187J60

** Note:  Alligator Installation Tools must be used to properly install Alligator Staple Fastener Sets

 

 

 

Staples
Type 300 Series Standard Stainless Steel Staples

 
LEGG CO. Part Number For Fastener Number Quantity Per Box

AL S62
AL S125
AL S 187

62
125
187

990
990
990

 

 

 

Staple Application Tool
Staple Lacer Low.jpg (208100 bytes)

bullet

The C187 Tool makes installation of the Alligator Staple lacing quick and easy.  

bullet

Handles Alligator 125 and 187 lacing.

bullet

Optional 62 Comb allows installation of #62 Lacing.  Order LEGG CO. Part Number AL ST5-16

Installation Length of Tool Legg Co. Part Number
2"
4"
6"
12"		 C187
C187-4
C187-6
C187-12

 

 

Staple Kit  Staple Tool Kit.jpg (145480 bytes)

bullet

Everything you need to install, maintain and repair No. 125 & No. 187 ALLIGATORโ Staple belt splices. Lightweight, only 16 1/2 lbs.

bullet

Kit includes a C187-6 installation tool, staple set plate, hand skiver, belt marker, belt nippers, and a 1 lb. Hammer.

bullet

All packaged in a durable metal box with  plenty  of  room  left  over  for staples,  fasteners and other items.

Order AL STK-1


Staple Dispenser
Staple Dispenser.jpg (183309 bytes)

bullet

Provides faster insertion of staples into application tool.

bullet

Holds enough staples for 24” of belt without reloading.

Fastener Number LEGG CO. Part Number
62
125 & 187 		AL C155
AL C150

 

 

Hinge Pin Retaining Washers
Retaining Washers.jpg (159997 bytes)

bullet

Prevent occasional migration of nylon- covered cable hinge pins.

bullet

Washers are furnished with packages of nylon covered pins and in cartons of splices with nylon-covered pins.

bullet

Pins should be checked frequently during the first few hours of running to determine whether migration is a problem.

bullet

50 Per Package

Fastener Size LEGG CO. Part Number
62
125
187 		AL62RET-50
AL125RET-50
AL187RET-50

 

 

Alligator Lacing
Alg Lacing.jpg (203775 bytes)

bullet

No Special Tools Required.

bullet

Carton contains everything needed for complete joints.
    (4 sets (joints) of lacing, 4 corrugated hinge pins and 1 installation gauge pin with clips.)

Selection Chart

Lacing Size No.

For Belts With Mechanical Fastener Ratings Up to
(PIW) 		Belt Thickness Range  
(inches) 		Recommended Minimum Pulley Diameter

7
15
20
25
27
35

50
65
95
100
100
150

3/32 - 9/64
1/8 - 5/32
5/32 - 3/16
3/16 - 7/32
7/32 - 9/32
9/32 - 5/16

2
21/2
3
4
5
7
Make Selection Above and Order Number:
For No. 7 Lacing For No. 25 Lacing
Belt Width
(inches)		 Legg Co. Part Number Belt Width
(inches)		 Legg Co. Part Number

24
36
60

 AL 7-24
AL 7-36
AL 7-60		 24
36
60

AL 25-24
AL 25-36
AL 25-60
For No. 15 Lacing For No. 27 Lacing
Belt Width
(inches)		 Legg Co. Part Number Belt Width
(inches)		 Legg Co. Part Number
24
36
60		 AL 15-24
AL 15-36
AL 15-60		 24
36
60		 AL 27-24
AL 27-36
AL 27-60
For No. 20 Lacing For No. 35 Lacing
Belt Width
(inches)		 Legg Co. Part # Belt Width
(inches)		 Legg Co. Part #
24
36
60		 AL 20-24
AL 20-36
AL 20-60		 24
36
60		 AL 35-24
AL 35-36
AL 35-60